Design a site like this with
Get started

DIY Barbell Rack – How to Build a Sturdy Rack in Just a Few Hours

If you’re looking for a simple, inexpensive way to organize your weight lifting equipment, a DIY barbell rack is the perfect solution. Whether you have a home gym or simply want to make use of the space in your garage, you can create a sturdy and useful rack in just a few hours.

One of the best ways to keep your barbells in good shape is to keep them off of the floor. The weight of several barbells can add up fast, and you’ll need somewhere to store them. However, leaving them in a sleeve on the floor can be dangerous, and it is not the etiquette of the fitness world. If you aren’t comfortable building a rack yourself, there are plenty of commercial options to choose from.

The first thing you should do is figure out the size and type of bars you have. This will allow you to determine the height of your storage rack. For most people, a rack that is about 8 feet long is the perfect solution. If you have longer barbells, you may need to make adjustments.

If you don’t have a lot of room for a rack, you could try a freestanding version. If you have plenty of room, you can also go vertical. But if you have limited space, you’ll probably find a good horizontal solution is easier to work with.

A DIY barbell rack is a cheap way to keep your barbells in good shape. Aside from saving you money, a DIY rack is a great way to display your workout equipment. You’ll also be able to use it to store other weightlifting equipment as well.

For this project, you’ll need a few wooden pieces. You can make the barbell rack out of plywood, or you can use an old drawer. You’ll also need some screws and a jigsaw. You can buy a few of the components at the local lumberyard, or you can find them elsewhere in your home. If you are going to be cutting wood, make sure to wear a pair of gloves. This will help protect your hands from dust and other debris.

The biggest challenge you’ll face is marking the appropriate holes. These are the points that will determine how strong the structure of your rack will be. If you don’t mark your holes properly, you’ll end up with a weaker piece. A good rule of thumb is to drill at least 6 holes on each 7-foot board. Depending on the size of your barbells, you’ll need to leave about 5 feet between each one.

If you have an older home, or don’t have the space to mount your own DIY barbell rack, you can purchase a vertical or horizontal barbell holder. These racks can be found for under $40. But you’ll still need to spend some time drilling.

You should also consider installing a heavy-duty clamp, preferably on the wall. A good clamp will not only hold your barbells in place, but it’ll also prevent them from sliding. A clamp can be purchased for less than $20.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: